Ford Bronco Rear Crossbar with MOLLE Panel – Starlink Mini Mount Ready, 2021+ 4-Door & Raptor

The Revolink Rear Crossbar adds a mounting platform and MOLLE panel across the rear cage of the 2021+ Ford Bronco 4-Door and Bronco Raptor. It bolts into the factory mounting points at the C-pillar, so there's no drilling and nothing to cut. Install takes about 20 minutes with hand tools.

Compatibility

• 2021+ Ford Bronco 4-Door
• 2022+ Ford Bronco Raptor (requires a T40 Torx bit to remove the factory C-pillar brace bolts)
• Hardtop or soft top
• Not compatible with the Bronco 2-Door or Bronco Sport

Starlink Mini Mount Ready

The Bronco's fiberglass roof lets Starlink signal pass through, so the Starlink Mini can ride inside the cabin, out of sight and out of the weather. The top channel of the crossbar accepts the Revolink Starlink Mini Quick Release Mount, and the 4 screws to attach it are included. Remove the dish in seconds with no tools.

Starlink Mini Quick Release Mount sold separately, or get both in the Starlink Mini Mount Kit for Ford Bronco.

Integrated MOLLE Panel

A MOLLE panel nests inside the crossbar for recovery straps, a first aid kit, tools or bags, all within reach of the cargo area.

Clean Cable Routing

Zip-tie slots run along both edges of the crossbar to keep the Starlink cable and other wiring tidy and off the headliner.

Built to Last

Satin black powder-coated aluminum with stainless steel hardware and pre-installed M8 threaded inserts.

What's in the Box

• Crossbar with 4 pre-installed M8 threaded inserts
• MOLLE panel
• 2 cage brackets
• 8 M8 × 25 mm screws and washers
• 14 M6 × 20 mm screws, washers and lock nuts
• Zip ties

Tools needed: 4 mm and 5 mm hex keys, 10 mm wrench or socket. Raptor: T40 Torx bit.

Revolink Satellite Gear is an independent accessory manufacturer, not affiliated with Ford Motor Company, SpaceX or Starlink.