PCI Starlink Mini Mounts at a Glance
These mounts for the Starlink Mini are made by PCI Race Radios and Unique Componentry. Which one you want comes down to one question: does your dish move, or does it stay put? Here's the short version from our shop. You'll find the mounts in our Starlink mounts collection.
Starlink Mini Go Mount: For a Dish That Moves
PCI designed the Starlink Mini Go Mount as a sleek, angled mount you can take on the go. It includes the bracket, 3 battery straps and 4 magnetic feet. There's room on the bracket for a battery pack, held with the provided velcro straps. If your campsite is under trees, remove the mount from the vehicle, attach the battery pack and move it to a clear open area.
Sold separately: the 24V battery pack (for 6+ hours of use), the DC power cord and metal landing pads for aluminum and other surfaces.
Want the dish too? The PCI Starlink Mini Go Kit is an unmodified Starlink Mini in a PCI Go bracket with magnetic feet. The Go version comes with the stock 110V supply. The Go Battery version adds a 24V pack and a short cord to the Mini. On aluminum roofs, add a metal plate (sold separately). Starlink service is sold separately. Don't use the battery pack in inclement weather.
UC Starlink Mini Wedge Mount with Magnetic Feet: For a Dish That Stays Put
The UC Starlink Mini Wedge Mount with Magnetic Feet is carbon fiber with stainless hardware and sits on magnetic feet, with no tools required. It gives the Mini a firm, stable hold. It comes in two versions: steel body for flat metal surfaces (or a sun roof with 4 steel plates added), and an aluminum-body version for Ford or other aluminum ribbed roofs, with steel plates and a template included. It fits the Mini very securely and is not intended for frequent removal and reinstallation.
UC Starlink Mini Wedge Mount with Magnetic Feet
Starlink Magnetic Feet for PCI Mini Go and PCI Race Mount
The Starlink Magnetic Feet for PCI Mini Go and PCI Race Mount are a set of 4 with washers and nuts. They fit the PCI Starlink Mini Race bracket, the PCI Starlink Gen 3 Race Bracket and the PCI Starlink Mini Go Bracket. The Go Mount already includes 4, so this set is for spares or for adding magnetic feet to a PCI Race bracket. The rubber coating helps prevent scratching. The magnets hold to steel. On an RV or aluminum vehicle, add the optional steel landing pads (the plates below).
4 pack Metal Mounting Plate with 3M Adhesive
The 4 pack Metal Mounting Plate with 3M Adhesive are 3.75" metal plates with 3M VHB adhesive, for aluminum, glass, fiberglass or RV roofs. These are the steel landing pads for the Go Mount and the magnetic feet: stick the plates down, and the magnetic feet hold to the plates.
4 pack Metal Mounting Plate with 3M Adhesive
PCI Starlink Mini Race Bracket
The PCI Starlink Mini Race Bracket is built for racers. It holds the dish securely and is lightweight and rugged. Magnetic feet are an optional addition, and there's a version that works with a Peakdo LinkPower2 battery pack. The Starlink antenna and batteries are sold separately. The PCI Starlink Mini Race Kit bundles an unmodified Starlink Mini with the race bracket and a power path: Race (hard-wire power cable with step-up converter) or Chase (cigar cable with step-up converter, plus magnetic feet).
PCI Starlink Mini Race Bracket
Which One Should You Pick?
- Your dish moves between spots: Starlink Mini Go Mount, or the PCI Starlink Mini Go Kit if you need the Mini too.
- Your dish stays put on the roof: UC Starlink Mini Wedge Mount with Magnetic Feet. Pick steel body or aluminum body to match your roof.
- Race vehicle: PCI Starlink Mini Race Bracket or the PCI Starlink Mini Race Kit.
- Aluminum, glass, fiberglass or RV roof with a magnetic mount: add the 4 pack Metal Mounting Plate with 3M Adhesive (the aluminum-body wedge mount already comes with steel plates).
- Spares, or magnets for a Race bracket: Starlink Magnetic Feet for PCI Mini Go and PCI Race Mount.
Not sure which fits your rig? Contact the Baja Racing Gear team.
