What the Wedge Mount Is
The UC Starlink Mini Wedge Mount with Magnetic Feet is a Unique Componentry mount for the Starlink Mini. It's made of carbon fiber with stainless hardware and sits on magnetic feet. No tools are required. It gives your Starlink Mini a firm, stable hold.
One thing to know before you buy: this mount fits the Starlink Mini very securely and is not intended for frequent removal and reinstallation. It's for a setup that stays put. If you plan to take the dish on and off a lot, look at the Go Mount at the end of this guide.
Pick the Right Version for Your Roof
The wedge mount comes in two versions:
- Steel body / Flat surface mount: for flat metal surfaces. It also works on a sun roof once you add 4 steel plates, such as the 4 pack Metal Mounting Plate with 3M Adhesive, which are made for aluminum, glass, fiberglass or RV roofs.
- Ford or other aluminum ribbed roof: the aluminum-body version. It comes with steel plates and a template for easy mounting.
UC Starlink Mini Wedge Mount with Magnetic Feet
Magnetic feet need a steel surface to hold to. On an aluminum roof, the steel plates give the magnets something to grab.
What's in the Box
- The carbon fiber wedge mount with stainless hardware
- Magnetic feet
- Aluminum-body version only: steel plates and a mounting template
The Starlink Mini is sold separately. No tools are needed. A clean rag and a spirit level are handy.
Install It Step by Step
Prep the roof
- Pick the spot. Find a flat spot on the roof with a clear view of the sky, free of debris.
- Clean it. Wipe the spot clean and dry where the feet or plates will sit.
- Place the plates if your version or roof needs them. On the aluminum-body version, use the included template to position the included steel plates. On a sun roof with the steel-body version, add 4 steel plates where the feet will sit.
UC Starlink Mini Wedge Mount with Magnetic Feet
Mount it
- Set the mount down. Set the magnetic feet down firmly on the steel roof or on the plates.
- Check that it sits flat. Use a spirit level to check that the mount sits flat. If it rocks, lift it and reseat it on a flatter spot.
- Seat the Starlink Mini. Seat the Mini in the wedge until it is held firmly.
- Final check. Make sure every magnetic foot is seated and the Mini doesn't move in the mount.
Keep It Holding
- Check the magnetic feet now and then. They should be seated firmly, with the feet and the surface under them clean.
- Look the mount over for cracks or damage.
- Leave the Mini in the mount. This mount is not intended for frequent removal and reinstallation.
FAQs
Is this mount meant to come off every day?
No. It fits the Starlink Mini very securely and is not intended for frequent removal and reinstallation. For a dish you move around, see the Go Mount below.
UC Starlink Mini Wedge Mount with Magnetic Feet
What if my roof is aluminum?
Magnets need steel to hold to. Choose the aluminum-body version, which comes with steel plates and a template.
Can I use it with the Go Mount?
They're separate mounts. The Go Mount lifts off and moves with you. The wedge mount stays put.
Do I need the PCI Starlink Mini Race Bracket?
No. The Race Bracket is a separate mount for race vehicles and isn't used with the wedge mount.
Where can I get help?
Contact the Baja Racing Gear team for help choosing or installing your wedge mount.
Other Starlink Mini Mounts
If you'll be moving the dish around, the Starlink Mini Go Mount is built to be taken on the go. It includes the bracket, 3 battery straps and 4 magnetic feet. The PCI Starlink Mini Go Kit packages an unmodified Starlink Mini with a PCI Go bracket and magnetic feet. For race vehicles, there's the PCI Starlink Mini Race Bracket. Browse more in our Starlink mounts collection.
